XBP9XT-DMUS-001 overview
XBP9XT-DMUS-001 is a component documented by Digi International Inc. The PDF description identifies it as "XTEND짰 OEM RF MODULES." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Digi International Inc.
- Part number: XBP9XT-DMUS-001
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The XTend module utilizes FHSS (Frequency Hopping Spread Spectrum) agility to avoid interference by hopping to a new frequency on every packet transmission or re-transmission.
- Its transmit power is software adjustable from 100 mW to that use 900 MHz as a license-free band.
- Innovations stamped in its design enable the XTend module to supply two- to eight-times the range of other modules operating within the unlicensed 900 MHz frequency band.
- CERTIFICATION PART 15.247) MCQ-XBPSX MCQ-XBPSX MCQ-XBSX IC ID (CANADA) 1846A-XBPSX 1846A-XBPSX 1846A-XBSX C-TICK (AUSTRALIA) RCM DIGI XBEE/DIGI XBEE-PRO XTC MODULE Features/Specifications 91001416 A2/408 © 2005-2008 Digi International Inc.
- Certification Part 15.247): - OUR-9XTEND IC ID (Canada): - 4214A-9XTEND Australia CERTIFICATIONS Indoor/Urban range (w/ 2.1 dB dipole antenna): Up to 3000 feet (900 m) Outdoor RF line-of-sight range (w/high gain antenna): Up to 40 miles (6.
- Power Requirements (Relative to Each Transmit Power Output Option) Transmit Power Output 1 mW 10 mW 100 mW 500 mW 1 W Transmit Current (5V) Typical 110 mA 140 mA 270 mA 500 mA 730 mA Transmit Current (3.3V) Typical 90 mA 100 mA 260 mA 600.
Topics covered by the datasheet
The document includes sections related to:
- RELATED PRODUCTS
- DESCRIPTION
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the XBP9XT-DMUS-001 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=xbp9xt-dmus-001-digi-international-inc