X25642SI overview
X25642SI is a component documented by Xicor Inc. The PDF description identifies it as "Advanced SPI Serial E 2 PROM with Block Lock TM Protection." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Xicor Inc.
- Part number: X25642SI
- Category: Interface
- Datasheet length: 16 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- PIN NAMES V SS Ground V CC Supply Voltage HOLD Hold Input NC No Connect PIN CONFIGURATION should be held HIGH at all times.
- OPERATING CHARACTERISTICS (Over the recommended operating conditions unless otherwise specified.) T A = +25 C, f = 1MHz, V CC = 5V Notes: (1) V IL min.
- I CC V CC Supply Current (Active) 5 mA SCK = V CC x 0.1/V CC x 0.9 @ 2MHz, I SB V CC Supply Current (Standby) 1 m A CS = V CC , V IN = V SS or V CC – 0.3V ILI Input Leakage Current 10 mAV IN = VSS to VCC ILO Output Leakage Current 10 mAV O.
- Units Test Conditions C I/O (3) Output Capacitance (SO) 8 pF V I/O = 0V C IN (3) Input Capacitance (SCK, SI, CS , WP , HOLD ) 6 pF V IN = 0V RECOMMENDED OPERATING CONDITIONS Temperature Min.
- Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
- Units fSCK Clock Frequency 0 2 MHz tCYC Cycle Time 500 ns tLEAD CS Lead Time 250 ns tLAG CS Lag Time 250 ns tWH Clock HIGH Time 200 ns tWL Clock LOW Time 200 ns tSU Data Setup Time 50 ns tH Data Hold Time 50 ns tRI (4) Data In Rise Time 2.
- Units fSCK Clock Frequency 0 2 MHz tDIS Output Disable Time 250 ns tV Output Valid from Clock LOW 200 ns tHO Output Hold Time 0 ns tRO (4) Output Rise Time 100 ns tFO (4) Output Fall Time 100 ns tLZ (4) HOLD HIGH to Output in Low Z 100 ns.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- DESCRIPTION
- ORDERING INFORMATION
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the X25642SI datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=x25642si-xicor-inc