WMF128K8-120CLI5 overview
WMF128K8-120CLI5 is a component documented by List of Unclassifed Man. The PDF description identifies it as "128Kx8 MONOLITHIC FLASH, SMD 5962-96690." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: List of Unclassifed Man...
- Part number: WMF128K8-120CLI5
- Category: Memory
- Datasheet length: 14 Pages
Key features noted in the PDF
- 32 lead, Hermetic Ceramic, 0.400" SOJ (Package 101)
- 32 pin, Hermetic Ceramic, 0.600" DIP (Package 300)
- 32 lead, Flatpack (Package 220)
- 32 lead, Formed Flatpack (Package 221)
- 32 pin, Rectangular Ceramic Leadless Chip Carrier (Package 601) n 100,000 Erase/Program Cycles Minimum n Sector Erase Architecture
- 8 equal size sectors of 16KBytes each
- Any combination of sectors can be concurrently erased. Also supports full chip erase PIN CONFIGURATION FOR WMF128K8-XXX5 A0-16 Address Inputs I/O0-7 Data Input/Output CS Chip Sele.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Also supports full chip erase PIN CONFIGURATION FOR WMF128K8-XXX5 A0-16 Address Inputs I/O0-7 Data Input/Output CS Chip Select OE Output Enable WE Write Enable VCC +5.0V Power VSS Ground PIN DESCRIPTION TOP VIEW V SS VCC WE NC A14 A13 A11.
- Note: For programming information refer to Flash Programming 1M5 Application Note. * The access time of 50ns is available in Industrial and Commercial temperature ranges only.
- Stresses above the absolute maximum rating may cause permanent damage to the device.
- Minimum DC voltage on input or I/O pins is -0.5V.
- During voltage transitions, inputs may overshoot V SS to -2.0 V for periods of up to 20ns.
- Maximum DC voltage on output and I/O pins is V CC + 0.5V.
- During voltage transitions, outputs may overshoot to Vcc + 2.0 V for periods of up to 20ns.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- ORDERING INFORMATION
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the WMF128K8-120CLI5 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=wmf128k8-120cli5-list-of-unclassifed-man