VJ13PC0480KBA overview
VJ13PC0480KBA is a component documented by AVX Corporation. The PDF description identifies it as "TransGuard AVX Multilater Ceramic Transient Vltage Sppressors." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: AVX Corporation
- Part number: VJ13PC0480KBA
- Category: IC
- Datasheet length: 10 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The VI curves below show the voltage/current characteristics for the 5.6V, 9V, 14V, 18V and low capacitance StaticGuard parts with currents ranging from parts of a micro amp to tens of amps.
- Repeated pulsing of TransGuard ® tran- sient voltage suppressors with 150Amp peak 8 x 20μS waveforms shows negligible degradation in breakdown voltage and minimal increases in leakage current.
- The VI curve below shows the voltage/current characteristics for the 3.3V, 5.6V, 12V, 14V, 18V, 26V, 30V, 48V and 60VDC parts with currents ranging from parts of a micro amp to tens of amps.
- This operating temperature range is for both surface mount and axial leaded products. -55 -40 -20 0 20 40 60 80 100 120 140 150 TYPICAL BREAKDOWN AND CLAMPING VOLTAGES VS TEMPERATURE - 18V 18V Temperature ( C) Typical Breakdown (V ) and Cl.
- Repeated pulsing of both 5.6 and 14V TransGuard ® transient voltage suppressors with in breakdown voltage and minimal increases in leakage current.
- The plots of typical breakdown voltage vs number of 150A pulses are shown below.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- ELECTRICAL CHARACTERISTICS
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the VJ13PC0480KBA datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=vj13pc0480kba-avx-corporation