VEMD1060X01 overview
VEMD1060X01 is a component documented by Vishay Siliconix. The PDF description identifies it as "Silicon PIN Photodiode 30-Jun-16." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Vishay Siliconix
- Part number: VEMD1060X01
- Category: IC
- Datasheet length: 6 Pages
Key features noted in the PDF
- Package type: surface mount
- Package form: 0805 top view
- Dimensions (L x W x H in mm): 2 x 1.25 x 0.85
- Radiant sensitive area (in mm 2): 0.23
- AEC-Q101 qualified
- High photo sensitivity
- High radiant sensitivity
Applications listed in the PDF
- High speed photo detector
- Small signal detection
- Proximity sensors Note
- Test conditions see table “Basic Characteristics” Note
- MOQ: minimum order quantity PRODUCT SUMMARY COMPONENT Ira (μA) ϕ (deg) λ0.1 (nm) VEMD1060X01 1.8 ± 70 350 to 1070
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- It is a low profile surface mount device (SMD) including the chip with a 0.23 mm 2 sensitive area detecting visible and near infrared radiation.
- Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN.
- UNIT Forward voltage I F = 50 mA V F -0 .
- 0 15n A Diode capacitance VR = 0 V, f = 1 MHz, E = 0 C D -3 .
- 7- p F Open circuit voltage E e = 1 mW/cm2, λ = 950 nm V o - 350 - mV Temperature coefficient of Vo Ee = 1 mW/cm2, λ = 950 nm TK Vo -- 2 .
- 6- m V / K Short circuit current E e = 1 mW/cm2, λ = 950 nm I k -1 .
- 8- μ A Temperature coefficient of Ik Ee = 1 mW/cm2, λ = 835 nm TK Ik -0 .
Topics covered by the datasheet
The document includes sections related to:
- DESCRIPTION
- FEATURES
- APPLICATIONS
- ORDERING INFORMATION
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the VEMD1060X01 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=vemd1060x01-vishay-siliconix