VCMT104T-470MN5 overview
VCMT104T-470MN5 is a component documented by Cyntec Co., Ltd. The PDF description identifies it as "Power Choke Coil VCMT104T MN5 type." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Cyntec Co., Ltd.
- Part number: VCMT104T-470MN5
- Category: IC
- Datasheet length: 9 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Remove frequency: (1MHz) from Features 3.
- Add Rated voltage (V): 75V Issued CYNTEC CO., LTD.
- 4.0mm Low loss realized with low DCR Capable of corresponding high frequency Compliance with RoHS and Halogen Free AEC-Q200 qualified Application Automotive applications Outline Dimensions W B' B T L H Recommend Land Pattern Dimensio.
- 乾坤科技股份有限公司 Jan., 2020 DOCUMENT : CYNVC-175-013 REVISION : A6 PAGE : 4 OF 9 Specifications Part Number L0 ◇ Inductance ( H ) @ (0A) Rdc ( m) ◇ Heat Rating Current DC Amps.
- Isat ( A ) Rated V oltage (V) Typical Maximum Typi cal Typical Maximum ◇：Significant Characteristic * ：If you require another part number please contact with us. **：Inductance Tolerance 20% Note 1.： All test data is referenced to 25℃ amb.
- Note 2.： Test Condition:100KHz, 1.0Vrms Note 3.： Idc : DC current (A) that will cause an approximate △T of 40℃ Note 4.： Isat : DC current (A) that will cause L0 to drop approximately 20% Note 5.： Operating Temperature Range -55℃ to + 155℃.
- 乾坤科技股份有限公司 Jan., 2020 DOCUMENT : CYNVC-175-013 REVISION : A6 PAGE : 8 OF 9 (3) Reel dimensions AB 2.0 ± 0.5 330.0 ± 2.0 100.0 ± 1.0 (4) Peel force of top cover tape The peel speed shall be about 300 mm/minute The peel force of top cover ta.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the VCMT104T-470MN5 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=vcmt104t-470mn5-cyntec-co-ltd