VCAN36A2-03S overview
VCAN36A2-03S is a component documented by Vishay Siliconix. The PDF description identifies it as "Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23 12-Nov-2019." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Vishay Siliconix
- Part number: VCAN36A2-03S
- Category: Interface
- Datasheet length: 6 Pages
Key features noted in the PDF
- For CAN and FLEX-bus applications
- Small SOT-23 package
- 2-line ESD protection
- Working range ± 36 V
- Low leakage current I R < 0.05 μA
- Low load capacitance CD < 10 pF
- ESD immunity acc. IEC 61000-4-2 ± 30 kV contact discharge ± 30 kV air discharge
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- IEC 61000-4-5; tp = 8/20 μs; single shot I PPM 2.4 A Peak pulse power T A = 25 °C; pin 1 or 2 to pin 3; acc.
- IEC 61000-4-5; tp = 8/20 μs; single shot P PP 150 W ESD immunity Contact discharge acc.
- IEC 61000-4-2; 10 pulses, TA = 25 °C VESD ± 30 kV Air discharge acc.
- 2 - 8/20 μs Peak Pulse Current Wave Form acc.
- 3 - 10/1000 μs Peak Pulse Current Wave Form Fig.
- Reverse Voltage VR ELECTRICAL CHARACTERISTICS (pin 1 to 3, 3 to 1, 2 to 3, or 3 to 2) (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN.
- reverse working voltage V RWM -- 3 6 V Reverse voltage At I R = 0.05 μA V R 36 - - V Reverse current At V RWM = 36 V I R - - 0.05 μA Reverse breakdown voltage At I R = 1 mA V BR 39 42 45 V Reverse clamping voltage At IPP 1 A; tp = 8/20 μs.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- ORDERING INFORMATION
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the VCAN36A2-03S datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=vcan36a2-03s-vishay-siliconix