UMYM5-0500-0500 overview
UMYM5-0500-0500 is a component documented by Omron Electronics LLC. The PDF description identifies it as "Safety Mat/Safety Mat Controller." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Omron Electronics LLC
- Part number: UMYM5-0500-0500
- Category: IC
- Datasheet length: 12 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Model Number Structure Model Number Legend Safety Mat Note: The actual lengths of the Safety Mat are 12 mm longer in both dimension A and dimension B.
- 8 ✕ 32 mm) and anchors (12 each) are included with each Trim.
- Switch Characteristics Safety Mat Safety Mat Controller Item Model MC3 Power voltage 24 VDC Operating voltage range -15% to +15% of rated supply voltage Power consumption * 3 W max.
- Item Model MC3 Rated load 6 A at 230 VAC/6 A at 24 VDC (resistive load) Maximum rated voltage 250 VAC/24 VDC Rated carry current 6 A Maximum switching capacity 1,500 VA Item Model UM Detection method Pressure sensing method Detection weigh.
- Material PVC (Polyvinyl Chloride) Ambient operating temperature -37 to 66°C (with no icing or condensation) Degree of protection IP67 Weight Approx.
- 24.4 kg/m2 Item Model MC3 Response time 30 ms max.
- Safety input Four-wire Safety Mat only Mat can be connected in series (Connectable number: 12 max.) The external impedance must be 8 Ω or less between M11 and M21 and between M12 and M22.
Topics covered by the datasheet
The document includes sections related to:
- Ordering Information
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the UMYM5-0500-0500 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=umym5-0500-0500-omron-electronics-llc