UF5405G overview
UF5405G is a component documented by Pan Jit International I. The PDF description identifies it as "GLASS PASSIVATED JUNCTION ULTRAFAST SWITCHING RCTIFIER." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Pan Jit International I...
- Part number: UF5405G
- Category: IC
- Datasheet length: 2 Pages
Key features noted in the PDF
- Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound
- Exceeds environmental standards of MIL-S-19500/228.
- Ultra Fast switching f or high ef ficiency.
- Both normal and Pb free product are available : Normal : 80~95% Sn, 5~20% Pb Pb free: 98.5% Sn above
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 1STAD-SEP.01.2004 DATA SHEET Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MIL-S-19500/228.
- Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
- Test Condition: Ta = Tj Per pulse test pulse width 300uS duty ≤ 2% DO-201AD Unit: inch(mm) .052(1.3) .210(5.3) 1.0(25.4)MIN.
- 1.0(25.4)MIN. .375(9.5).285(7.2) .048(1.2) .188(4.8) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICSFEATURES Ratings at 25°C ambient temperature unless otherwise specified.
- Single phase, half wave, 60 Hz, resistive or inductive load.
- 2STAD-SEP.01.2004 Fig.1 FORWARD CHARACTERISTICS Fig.2 FORWARD CURRENT DERATING CURVE Fig.3 TYPICAL REVERSE LEAKAGE CHARACTERISTICS Fig.4 PEAK FORWARD SURGE CURRENT INSTANTANEOUS FORWARD VOLTAGE,VOLTS NO.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the UF5405G datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=uf5405g-pan-jit-international-i