TS1103-100 overview
TS1103-100 is a component documented by Touchstone Semiconducto. The PDF description identifies it as "A 1關A, 200關VOS Bidirectional Precision Current-Sense Amplifier." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Touchstone Semiconducto...
- Part number: TS1103-100
- Category: Amplifier
- Datasheet length: 11 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Consuming a very low 1μA supply current, the TS1103 high-side current-sense amplifiers combine a 200-µV (max) VOS and a 0.6% (max) gain error for cost-sensitive applications .
- For all high -side bidirectional current-sensing applications, the TS1103s are self -powered and feature a wide input common-mode voltage range from 2V to 25V.
- All TS1103s are specified for operation over the -40°C to +105°C extended temperature range.
- A 1µA, 200µVOS Bidirectional Precision Current-Sense Amplifier TYPICAL APPLICATION CIRCUIT PART GAIN OPTION TS1103-25 25 V/V TS1103-50 50 V/V TS1103-100 100 V/V TS1103-200 200 V/V The Touchstone Semiconductor logo is a registered trademark.
- Exposure to any absolute maximum rating conditions for extended periods may affect device reliability and lifetime.
- Consult Touchstone Semiconductor for products specified with wider operating temperature ranges.
- VRS+ = 3.6V; VSENSE = (VRS+ - VRS-) = 0V; COUT = 47nF; VDD = 1.8V; TA = -40°C to +105°C, unless otherwise noted.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- APPLICATIONS
- DESCRIPTION
- ELECTRICAL CHARACTERISTICS
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the TS1103-100 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ts1103-100-touchstone-semiconducto