TRAW overview
TRAW is a component documented by Ningbo Tianbo Ganglian. The PDF description identifies it as "Max. switching current 20A." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Ningbo Tianbo Ganglian ...
- Part number: TRAW
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- switching current 208 © 10A continuous rating 85°C «Different contact form available © Open or sealed cover available © Conform to ROHS,ELV directive m Ordering Code TRAW — S — Z / 12vDC 1 2 3 4 1.
- Contact Form: Z: Form 1C, H: Form 1A, SH: Form 1U, SZ: Form 1W 5.
- In case the tolerance is not shown in outline dimension, the tolerance should be +0.2mm for outline dimensionsmm; 40.3mm for outline dimension: 1~5mm and 40.4mm for outline dimension>Smm, 2).
- The tolerance without indication is always +0.mm for the dimension of PCB layout.
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the TRAW datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=traw-ningbo-tianbo-ganglian