TPS0505 overview
TPS0505 is a component documented by Toppower Electronic Tec. The PDF description identifies it as "2W 6KVDC Isolated Dual Output DC/DC Converters." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Toppower Electronic Tec...
- Part number: TPS0505
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Units Voltage range 5V input 4.5 5 5.5 V Voltage range 12V input 11 12 13.2 V Voltage range 15V input 13.4 15 16.4 V Voltage range 24V input 22 24 26.5 V OUTPUT CHARACTERISTICS Parameter Conditions Min.
- Units Rated Power TA= -40°C to 85°C 2 W Voltage Set Point Accuracy See tolerance envelope 10 % Line regulation High VIN to low VIN 1.0 1.2 %/% Load Regulation(10% load to rated load) 5V output 9 16 % Load Regulation(10% load to rated load).
- Units Isolation test voltage Tested for 1 second 6000 VDC Resistance Viso= 1000VDC 1 GΩ GENERAL CHARACTERISTICS Parameter Conditions Min.
- Units Switching frequency All input types 40 kHz TEMPERATURE CHARACTERISTICS Parameter Conditions Min.
- Units Specification Derating if the temperature ≥85°C -40 105 ℃ Storage -50 130 ℃ Case Temperature above ambient All output types 35 ℃ Cooling Free air convection TEMPERATURE DERATING GRAPHS TOLERANCE ENVELOPES MECHANICAL DIMENSIONS PIN CO.
- 16.70± 0.80 11.70± 0.80 16.70± 0.55 20.70± 0.55 5.50± 0.25 6.80± 0.55 0.60± 0.15 Unless otherwise stated all dimensions in mm±0.5mm.
- Unless otherwise stated all dimensions in mm±0.5mm.
Topics covered by the datasheet
The document includes sections related to:
- TPS TOPPOWER
- FEATURES
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the TPS0505 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=tps0505-toppower-electronic-tec