TP321 overview
TP321 is a component documented by 3PEAK INC. The PDF description identifies it as "General Purpose, 1MHz, Micro-Power CMOS Op-Amps." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: 3PEAK INC.
- Part number: TP321
- Category: IC
- Datasheet length: 12 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The TP321/358/324 are unity gain stable with a constant 1MHz gain-bandwidth product, 1V/μs slew rate while consuming only 45μA of supply current per amplifier .
- The rail-to-rail input and output characteristics allow the full power-supply voltage to be used for signal range.
- The TP321/358/324 are ideal choices for battery -powered applications because they minimize errors due to power supply voltage variations over the lifetime of the battery and maintain high CMRR even for a rail -to-rail input op-amp.
- Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime.
- If the input extends more tha n 300mV beyond the power supply, the input current should be limited to less than 10mA.
- Note 3: A heat sink may be required to keep the junction temperature below the absolute maximum.
- This depends on the power supply voltage and how many amplifiers are s horted.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Applications
- Description
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the TP321 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=tp321-3peak-inc