TFS360F overview
TFS360F is a component documented by List of Unclassifed Man. The PDF description identifies it as "Filter Specification." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: List of Unclassifed Man...
- Part number: TFS360F
- Category: IC
- Datasheet length: 5 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Measurement condition Ambient temperature: 23 °C Input power level: 0 dBm Terminating impedances for input: 580 Ohm // -0.85 pF for output: 580 Ohm // -0.85 pF Coupling coil: 91 nH Characteristics Remark: Reference level for the relative a.
- The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 1.5 dB filter attenuation level relative to the insertion loss ae.
- The nominal frequency fN is fixed on 360 MHz without tolerance.
- The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the opera.
- value tolerance/limit Insertion loss ae = amin 3,3 dB max.
- 5,0 dB (Reference level) Nominal frequency fN - 360,00 MHz Centre frequency fc 360,015 MHz Pass band ripple fN ± 67,7kHz BW - max.
- 1,5 dB Relative attenuation arel fN ± 0,4 MHz…f N ± 0,6 MHz 36...53 dB min.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the TFS360F datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=tfs360f-list-of-unclassifed-man