T436416A overview

T436416A is a component documented by Taiwan Memory Technolog. The PDF description identifies it as "4M X 16 SDRAM." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Taiwan Memory Technolog...
  • Part number: T436416A
  • Category: Memory
  • Datasheet length: 29 Pages

Key features noted in the PDF

  • 3.3V power supply
  • Four banks operation
  • LVTTL compatible with multiplexed address
  • All inputs are sampled at the positive going edge of system clock
  • Burst Read Single-bit Write operation
  • DQM for masking
  • Auto refresh and self refresh

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • Revision: B SDRAM 4M x 16 SDRAM 1M x 16bit x 4Banks Synchronous DRAM 3.3V power supply Four banks operation LVTTL compatible with multiplexed address All inputs are sampled at the positive going edge of system clock Burst Read Single-bit W.
  • Functional operation should be restricted to recommended operating condition.
  • RECOMMENDED DC OPERATING CONDITIONS (TA = 0 to +70°°°°C, Voltage referenced to VSS=0V) Parameter Symbol Min.
  • Unit Notes Supply Voltage V DD,VDDQ 3.0 3.3 3.6 V Input High Voltage V IH 2.0 3.0 V DD+0.3V V 1 Input Low Voltage V IL -0.3 0 0.8 V 2 Output logic high voltage V OH 2.4 - - V I OH=-2mA Output logic low voltage V OL - - 0.4 V I OL=2mA Input.
  • VIH (max) = 4.6V AC for pulse width ≤ 10ns acceptable.
  • VIL (min) = -1.0V AC for pulse width ≤ 10ns acceptable.
  • Any input 0V ≤ VIN ≤ VDD+ 0.3V , all other pin are not under test = 0V.

Topics covered by the datasheet

The document includes sections related to:

  • FEATURES
  • ORDERING INFORMATION

Engineering review checklist

  • Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
  • Check package pinout, boot configuration, programming interface and silicon-revision errata.
  • Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the T436416A datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=t436416a-taiwan-memory-technolog

T436416A Taiwan Memory Technolog... Memory T436416A datasheet T436416A specifications T436416A applications