T12-G overview
T12-G is a component documented by STMicroelectronics. The PDF description identifies it as "12A TRIACS Sep-2002." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: STMicroelectronics
- Part number: T12-G
- Category: IC
- Datasheet length: 7 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- By using an internal ceramic pad, the BTA series provides voltage insulated tab (rated at 2500V RMS) complying with UL standards (File ref.: E81734) Symbol Value Unit IT(RMS) 12 A VDRM /VRRM 600 and 800 V IGT (Q1) 5 to 50 mA ABSOLUTE MAXIM.
- Tc = 90°C ITSM Non repetitive surge peak on-state current (full cycle, Tj initial = 25°C) F = 50 Hz t = 20 ms 120 A F = 60 Hz t = 16.7 ms 126 I²tI ²t Value for fusing tp = 10 ms 78 A²s dI/dt Critical rate of rise of on-state current IG = 2.
- Note 2: for both polarities of A2 referenced to A1 Symbol Test Conditions Quadrant T12 BTA/BTB12 Unit T1235 TW SW CW BW IGT (1) VD = 12 V RL = 30 Ω I - II - III MAX.
- 1.3 V VGD VD = VDRM RL = 3.3 kΩ Tj = 125°C I - II - III MIN.
- 50 10 25 50 70 mA II 60 15 30 60 80 dV/dt (2) VD = 67 %VDRM gate open Tj = 125°C MIN.
- 40 50 mA II 80 100 dV/dt (2) VD = 67 %VDRM gate open Tj = 125°C MIN.
- 5 10 V/µs Symbol Test Conditions Value Unit VT (2) I TM = 17 A tp = 380 µs Tj = 25°C MAX.
Topics covered by the datasheet
The document includes sections related to:
- DESCRIPTION
- ORDERING INFORMATION
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the T12-G datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=t12-g-stmicroelectronics