SPS30 overview
SPS30 is a component documented by Sensirion AG Switzerlan. The PDF description identifies it as "Particulate Matter Sensor for Air Quality Monitoring and Control." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Sensirion AG Switzerlan...
- Part number: SPS30
- Category: Sensor
- Datasheet length: 26 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- With dimensions of only 41 x 41 x 12 mm 3, it is also the perfect solution for applications where size is of paramount importance, such as wall-mounted or compact air quality devices.
- Default conditions of 25±2 °C, 50±10% relative humidity and 5 V supply voltage The sensor shows best performance when operated within recommended normal temperature and humidity range of 10 to 40 °C and 20 to 80 % RH, respectively.
- Parameter Conditions Min Typ Max Unit Supply voltage - 4.5 5.0 5.5 V Supply current Sleep-Mode - 38 50 µA Idle-Mode 300 330 360 Measurement-Mode 45 55 65 mA Measurement-Mode, first 200ms (fan start) - - 80 Input high level voltage (VIH).
- Exposure to the absolute maximum rating conditions for extended periods may affect the reliability of the device.
- Parameter Min Max Unit Supply voltage VDD -0.3 5.5 V Interface Select SEL -0.3 4.0 I/O pins (RX/SDA, TX/SCL) -0.3 5.5 Max.
- current on any I/O pin -16 16 mA Operating temperature range -10 60 °C Storage temperature range -40 70 Operating humidity range 0 95 % RH Table 3: Absolute minimum and maximum ratings.
- In Figure 1 a description of the pin layout is given.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SPS30 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=sps30-sensirion-ag-switzerlan