SPS-1300 overview
SPS-1300 is a component documented by SYNERGY MICROWAVE CORPO. The PDF description identifies it as "PHASE SHIFTER." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: SYNERGY MICROWAVE CORPO...
- Part number: SPS-1300
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- A 08/16/11) Frequency 1290 - 1310 MHz Insertion Loss (dB) Typ.
- 1.25 1.8 Control Bandwidth DC to 250 kHz Control Voltage 0 - 12 V (Max.) Phase Shift Range 0 - 120º (Min.) VSWR 1.55:1 (Typ.) Input Power 0 dBm (Max.) Impedance 50 Ohms (Nom.) Operating Temperature Range -40 to +85 °C Absolute Maximum Rati.
- Range -55 to +100 ºC RF Input Power +20 dBm Contol Voltage +20 V Package # 357 PORT CONFIGURATION Input Output CTRL GND 4 8 6 All Others 1290 - 1310 MHzOPTIMIZED BANDWIDTH PHASE SHIFTER SURFACE MOUNT MODEL: SPS-1300 E-Mail: sales@synergymw.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SPS-1300 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=sps-1300-synergy-microwave-corpo