SP44-6 overview
SP44-6 is a component documented by SIPAT Co,Ltd. The PDF description identifies it as "44MHz SAW Filter 6MHz Bandwidth." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: SIPAT Co,Ltd
- Part number: SP44-6
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4.
- This is the optimum impedance in order to achieve the performance show Matching Configuration Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SP44-6 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=sp44-6-sipat-co-ltd