SP02A-XX-XXX overview
SP02A-XX-XXX is a component documented by Amphenol Industrial Pro. The PDF description identifies it as "Miniature Cylindrical Connectors." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Amphenol Industrial Pro...
- Part number: SP02A-XX-XXX
- Category: IC
- Datasheet length: 52 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level.
- PT, SP, MS/PT Service Rating Service Rating Recommended Operating AC Voltage at Sea Level Test Voltage AC (RMS), 60 cps Sea Level 50,000 ft.
- Telescoping sleeves (MS 3420A) can be used to adapt to cables smaller than minimum close-down. “P” Translucent nylon boot for retaining customer- applied potting compounds; held in place by a threaded ring Amphenol PT, SP, MS/PT Proprietar.
- Front View Receptacle Side View Class “E”, MS/”E” H ±.016 S A Dia. +.001 -.005 J Flat +.000 -.010 K +.011 -.010 M Panel Thickness R Thread Class 2A UNEF Z Max.
- Printed Circuit Board Contacts Shell Size Part Number* PT02 with PCB Contacts Receptacle Front View Receptacle Side View R (TP) S +.011 -.010 A +.001 -.005 K +.021 -.010 L Max.
- Shell Size Part Number* PT07 with PCB Contacts Receptacle Front View Receptacle Side View H +.017 -.016 S ±.010 A Dia. +.001 -.005 J Flat +.000 -.010 K +.011 -.010 M ±.010 P Panel Thickness R Thread Class 2A Z +.025 -.035Min.
- Front View Receptacle Side View R (TP) S ±.016 A Dia. +.001 -.005 K ±.015 L +.025 -.015 N Dia. +.001 -.005 U +.011 -.010 Z Max.
Topics covered by the datasheet
The document includes sections related to:
- MIL-DTL-26482_V01 AIO
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SP02A-XX-XXX datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=sp02a-xx-xxx-amphenol-industrial-pro