SH35VB-100W overview
SH35VB-100W is a component documented by HY ELECTRONIC CORP. The PDF description identifies it as "Glass Passivated 3 Phase Bridge Rectifiers." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: HY ELECTRONIC CORP.
- Part number: SH35VB-100W
- Category: IC
- Datasheet length: 3 Pages
Applications listed in the PDF
- For use in high power supply inverters,servo motor and welding machine applications Maximum Ratings and
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Single phase, half wave, 60Hz, resistive or inductive load.
- Maximum Repetitive Peak Reverse Voltage VRRM V Maximum RMS Voltage VRMS V Maximum DC Blocking Voltage VDC V Peak Non-Repetitive Reverse Voltage VRSM V Maximum Average Forward Rectified Current @T C=55 ℃ I(AV) A Peak Forward Surge Current.
- 11, 18-May-2020 0.1 TJ=25°C TJ=75°C TJ=100°C TJ=125°C Pulse Width 300uS 2%Duty Cycle Fig.
- 4 - Typical Forward Characteristics I nstantaneous Forward Current (A) Instantaneous Forward Voltage (V) I nstantaneous Reverse Current (mA) Fig.
- 1 - Forward Current Derating Curve A verage Forward Current (A) 100 150 200 250 300 350 400 1 10 100 P eak Forward Surge Current (A) 8.3mS Single Half-Sine-Wave (JEDEC METOD) Fig.
- 2 - Maximum Non-Repetitive Surge Current Number of Cycles at 60Hz TJ=150°C 2000 All d ata sheet.com ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons.
Topics covered by the datasheet
The document includes sections related to:
- Applications
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SH35VB-100W datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=sh35vb-100w-hy-electronic-corp