SE028 overview
SE028 is a component documented by Pico Technology Ltd. The PDF description identifies it as "Cloud-connected 8-channel thermocouple data logger." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Pico Technology Ltd.
- Part number: SE028
- Category: IC
- Datasheet length: 11 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The logger can measure and record temperatures ranging from −270 °C to +1820 °C using the appropriate thermocouple type (B, E, J, K, N, R, S, T).
- All types of thermocouple in common use today are supported, allowing an effective temperature range of −270 °C to +1820 °C (the actual temperature range depends on the thermocouple being used).
- For Type K thermocouples, the TC-08 can maintain a better than 0.025 °C resolution over a −250 °C to +1370 °C range.
- USB TC-08 thermocouple data logger Specifications Hardware Number of channels (single unit) 8 Maximum number of channels (using up to 20 units) 160 Conversion time 100 ms per thermocouple channel + 100 ms for CJC (this can be disabled if a.
- The four input ranges (±50 mV, ±500 mV, ±5 V and 4–20 mA) allow you to measure a wide range of signals.
Topics covered by the datasheet
The document includes sections related to:
- Ordering information
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SE028 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=se028-pico-technology-ltd