SAWS226AA overview
SAWS226AA is a component documented by Seoul Semiconductor. The PDF description identifies it as "Natural light closest to the sunlight." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Seoul Semiconductor
- Part number: SAWS226AA
- Category: IC
- Datasheet length: 22 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 97 (on the BBL) Size 28mm * 28mm LES 22mm MacAdam 3-step binning Uniformed Shadow Excellent Thermal management RoHS compliant Out door area – Bay lighting, Street lighting, Tunnel lighting Architectural – Spot lighting Industrial Rev1.0, F.
- Color coordinate : 0.005, CCT 5% tolerance. (2) Seoul Semiconductor maintains a tolerance of ±7% on flux and power measurements. (3) ФV is the total luminous flux output as measured with an integrating sphere. (4) Tolerance is ±3% on for.
- Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.
- Thermal resistance can be increased substantially depending on the heat sink design/operating condition, and the maximum possible driving current will decrease accordingly.
- Forward Current IF - 1.05 2.1 A Power Dissipation Pd - 37.2 79.4 W Junction Temperature Tj - - 125 ºC Operating Temperature Topr - 40 - 85 ºC Surface Temperature TS - 40 - 105 ºC Storage Temperature Tstg - 40 - 105 ºC Thermal resistance (J.
- Relative Luminous Flux, IF=1.05A Fig 6.
- Bin Code Description, Tj=85oC, IF=1.05A Table 5.
Topics covered by the datasheet
The document includes sections related to:
- Description
Engineering review checklist
- Verify forward current and voltage, optical bin, wavelength or color coordinates and viewing geometry.
- Derate light output and lifetime for junction temperature and the actual PCB thermal path.
- Confirm polarity, footprint, reflow profile and moisture-sensitivity handling before production.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SAWS226AA datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=saws226aa-seoul-semiconductor