SA33 overview
SA33 is a component documented by Taiwan Semiconductor Co. The PDF description identifies it as "500W, 5V - 170V Transient Voltage Suppressor L2105." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Taiwan Semiconductor Co...
- Part number: SA33
- Category: IC
- Datasheet length: 9 Pages
Key features noted in the PDF
- AEC-Q101 qualified available
- Excellent clamping capability
- Low impedance surge resistance
- 500W surge capability at 10/1000μs waveform
- Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional
- Typical IR less than 1μA above 10V
- RoHS Compliant
Applications listed in the PDF
- Protect sensitive circuit from damage by high voltage transients
- Lighting, ESD transient voltage protection of IC, system
- Inductive switching load protection of IC, system
- Electrical Fast Transient Immunity protection of IC, system
- Case: DO-204AC (DO-15)
- Molding compound meets UL 94V-0 flammability rating
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Non-repetitive current pulse per Fig.3 and Derated above TA = 25°C per Fig.2 2.
- Mounted on 10 x 10 mm copper pads to each terminal 3.
- 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Devices for bipolar applications 1.
- Electrical characteristics apply in both directions MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Part Number Breakdown voltage VBR@IT (V)(1) Test current IT (mA) Working stand-off voltage VWM (V) Reverse.
- VBR measure after IT applied for 300us, IT = square wave pulse or equivalent.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- APPLICATIONS
- ORDERING INFORMATION
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SA33 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=sa33-taiwan-semiconductor-co