SA24A overview
SA24A is a component documented by ON Semiconductor. The PDF description identifies it as "Transient Voltage Suppressors Rev. D." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ON Semiconductor
- Part number: SA24A
- Category: IC
- Datasheet length: 6 Pages
Key features noted in the PDF
- Glass passivated junction.
- 500W Peak Pulse Power capability on 10/1000 µs waveform.
- Excellent clamping capability.
- Low incremental surge resistance.
- Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional.
- Typical IR less than 1.0 µA above 10V. DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 500W Peak Pulse Power capability on 10/1000 µs waveform.
- Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional.
- Typical IR less than 1.0 µA above 10V.
- Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
- D Transient Voltage Suppressors (continued) Electrical Characteristics TA = 25°C unless otherwise noted * For bidirectional parts with VRWM<10V, the IR max limit is doubled.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the SA24A datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=sa24a-on-semiconductor