S6012R overview
S6012R is a component documented by Littelfuse. The PDF description identifies it as "SCRs (1 A to 70 A)." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Littelfuse
- Part number: S6012R
- Category: IC
- Datasheet length: 12 Pages
Key features noted in the PDF
- R o H S C o m p l i a n t
- Electrically-isolated package
- High voltage capability — 200 V to 1000 V
- High surge capability — up to 950 A
- Glass-passivated chip Compak SCR
- Surface mount package — 1 A series
- New small profile three-leaded Compak package
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Operating temperature range (T J) is -65 °C to +125 °C for TO-92 devices and -40 °C to +125 °C for all other packages.
- Storage temperature range (T S) is -65 °C to +150 °C for TO-92 devices, -40 °C to +150 °C for TO-202 and TO-220 devices, and -40 °C to +125 °C for all others.
- Lead solder temperature is a maximum of 230 °C for 10 seconds maximum; ≥1/16" (1.59 mm) from case.
- TYPE Part Number IT VDRM & VRRM IGTIsolated Non-isolated TO-92 TO-220 TO-202 TO-220 TO-251 V-Pak Compak TO-252 D-Pak (1) (2) (15) Amps Volts (4) mAmps See “Package Dimensions” section for variations. (11) IT(RMS) IT(AV) MAX MAX MIN MIN MAX.
- E6 - 3 Thyristor Product Catalog +1 972-580-7777 Electrical Specification Notes (1) See Figure E6.5 through Figure E6.16 for current rating at specified operating case temperature. (2) See Figure E6.1 and Figure E6.2 for free air current r.
- When ordering special lead forming, add type number as suffix to part number. (12) Pulse width ≤10 µs (13) Initial on-state current = 200 mA dc for 1 A through 16 A devices; 400 mA dc for 20 A through 70 A devices. (14) T C = TJ for test c.
- Teccor's J package or W package is recommended for ≥50 A rms continuous current requirements. (16) For various durations of an exponentially decaying current waveform, see Figure E6.3 and Figure E6.4. (tW is defined as 5 time constants.) (.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the S6012R datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=s6012r-littelfuse