S6006DS2 overview
S6006DS2 is a component documented by Littelfuse. The PDF description identifies it as "Sensitive SCRs (0.8 A to 10 A)." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Littelfuse
- Part number: S6006DS2
- Category: IC
- Datasheet length: 12 Pages
Key features noted in the PDF
- R o H S C o m p l i a n t
- Electrically-isolated TO-220 package
- High voltage capability — up to 600 V
- High surge capability — up to 100 A
- Glass-passivated chip Compak Features
- Surface mount package — 0.8 A series
- New small-profile three-leaded Compak package
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- All measurements (except I GT) are made with an external resistor RGK = 1 kΩ unless otherwise noted.
- All measurements are made at 60 Hz with a resistive load at an ambient temperature of +25 °C unless otherwise specified.
- Operating temperature (T J) is -65 °C to +110 °C for EC Series devices, -65 °C to +125 °C for 2N Series devices, -40 °C to +125 °C for “TCR” Series, and -40 °C to +110 °C for all others.
- Storage temperature range (T S) is -65 °C to +150 °C for TO-92 devices, -40 °C to +150 °C for TO-202 and Compak devices, and -40 °C to +125 °C for all others.
- Lead solder temperature is a maximum of +230 °C for 10 seconds maximum ≥1/16" (1.59 mm) from case.
- TYPE Part Number IT VDRM & VRRM IGT IDRM & IRRM VTMIsolated Non-isolated TO-220 TO-202 TO-251 V-Pak TO-252 D-Pak (1) Amps Volts (2) (12) µAmps (20) (21) µAmps (3) (10) Volts See “Package Dimensions” section for variations. (11) IT(RMS) IT(.
- E5 - 5 Thyristor Product Catalog +1 972-580-7777 Electrical Specifications Notes (1) See Figure E5.1 through Figure E5.9 for current ratings at specified operating temperatures. (2) See Figure E5.10 for I GT versus TC or TL. (3) See Figure.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the S6006DS2 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=s6006ds2-littelfuse