S32K341 overview
S32K341 is a component documented by NXP Semiconductors. The PDF description identifies it as "Supports S32K344, S32K324, S32K314, S32K312, S32K341 and S32K342. Data is preliminary for S32K311, S32K310, S32K328, S32K338, S32K348, S32K358 and S32K388 Rev. 6 - 11/2022." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: NXP Semiconductors
- Part number: S32K341
- Category: IC
- Datasheet length: 141 Pages
Key features noted in the PDF
- S32K388 NXP Semiconductors Feature comparison S32K3xx Data Sheet, Rev. 6, 11/2022 Data Sheet: Technical Data Preliminary Information 12 / 141
- Device failure is defined as: "If after exposure to ESD pulses, the device does not meet specification requirements."
- This parameter is tested in conformity with AEC-Q100-002.
- All ESD testing conforms with AEC-Q100 Stress Test Qualification for Automotive Grade Integrated Circuits.
- This parameter is tested in conformity with AEC-Q100-011.
- This parameter is tested in conformity with AEC-Q100-004.
- The slave mode parameters (S15 - S22) assume 50% duty cycle on SAI_BCLK input. Any change in SAI_BCLK duty cycle
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The VDD_DCDC supply voltage is only present in certain devices and packages (S32K358, S32K348, S32K338, S32K328). **Table 2.
- 6.0 V maximum for 10 hours over lifetime; 7.0 V maximum for 60 seconds over lifetime.
- It is not the operating temperature range.
- degraded when voltage drops below 2.97 V.
- The VDD_DCDC supply voltage is only present in certain devices and packages (S32K358, S32K348, S32K338, S32K328). **Table 3.
- The S32K3x8 devices provide two options to derive the V15 regulator from the 5V or 3.3V supply.
- VDD_DCDC must be connected to the VDD_HV_A or VDD_HV_B, supply voltage.
Topics covered by the datasheet
The document includes sections related to:
- S32K3XX_V01 NXP
- Datasheet sections
- Features
- Ordering information
- Revision history
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the S32K341 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=s32k341-nxp-semiconductors