S30RW3FF200 overview
S30RW3FF200 is a component documented by Banner Engineering Corp. The PDF description identifies it as "S30 Sensors AC-Voltage Series." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Banner Engineering Corp...
- Part number: S30RW3FF200
- Category: Sensor
- Datasheet length: 7 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- A Supply Voltage and Current 20 av V to 250 V ac (50 Hz to 60 Hz) Average current: 20 mA Peak current: 200 mA at 20 V ac 500 mA at 120 V ac 750 mA at 250 V ac Supply Protection Circuitry Protected against transient voltages Output Configur.
- Repeatability Opposed mode: 2 ms Other models: 4 ms Repeatability and response are independent of signal strength Indicators Two LEDs (Green and Yellow) Green ON steady: power to sensor is ON Yellow ON steady: sensor sees light Yellow flas.
- Method 201A (Vibration; frequency 10 Hz to 60 Hz, max., double amplitude 0.06 inch acceleration 10G).
- Method 213B conditions H&I. (Shock: 75G with unit operating; 100G for non-operation) Certifications Performance Curves Table 1: Opposed Mode Sensors Beam Pattern Excess Gain 0250 mm500 mm750 mm 250 mm500 mm 750 mm 010"20"30" 10"20" 30" DIS.
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the S30RW3FF200 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=s30rw3ff200-banner-engineering-corp