RKS1C101MCNAFEGS overview
RKS1C101MCNAFEGS is a component documented by Nichicon corporation. The PDF description identifies it as "CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Nichicon corporation
- Part number: RKS1C101MCNAFEGS
- Category: IC
- Datasheet length: 11 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- SMD type : Lead free reflow soldering condition at 260°C peak correspondence.
- applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C.
- R K 2 3 E M C N 1 1 A F E G S 14 15 16 Configuration Taping code Size code Control code Capacitance tolerance (±20%) Rated capacitance (47µF) Rated voltage (25V) Type, Series name S Type numbering system (Example : 25V 47µF) 0.2max.
- Test condition 125°C, rated voltage, 3000Hrs Capacitance change Within ± 20% of initial value before test tan δ 150% or less than the initial specified value ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less.
- Marking Navy blue print on the case top Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% R.H.
- Pre-heating shall be done at 150 to 180°C : within 90 seconds, Over 200°C : within 60 seconds, 260°C : within 5 seconds.
- in case peak temperature is 260°C or less, reflow soldering shall be two times maximum.
Topics covered by the datasheet
The document includes sections related to:
- RKS NICHICON
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the RKS1C101MCNAFEGS datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=rks1c101mcnafegs-nichicon-corporation