RFPA5200TR7 overview
RFPA5200TR7 is a component documented by Qorvo, Inc. The PDF description identifies it as "3.3V to 5.0V, 2.4GHz to 2.5GHz Integrated PA Module." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Qorvo, Inc
- Part number: RFPA5200TR7
- Category: IC
- Datasheet length: 8 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Typical Conditions VCC = 5.0V, VREG = 2.9V, temperature = 25°C, MSC7 HT20 and HT40, frequency = 2412MHz to 2484MHz unless otherwise noted.
- 2 5V VREG Voltage (at VREG pin of Eval board) 2.85 2.90 3.3 V Turn-on time from setting of VREGS 300 ns Output stable to within 90% of final gain Turn-off time from setting of VREGS4 0 0 n s Stability 4:1 No spurs above -47dBm CW P1dB 33 d.
- Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device.
- Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability.
- Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- tions is not implied.
- Typical Conditions (continued) Tx Performance - Generic ESD Human Body Model 1000 V All pins Charge Device Model 1000 V All pins Thermal Resistance RTH_I 38 °C/W V CC=5V, POUT = 27dBm, 64QAM 54Mbps, duty cycle = 100%, heated stage = 85°CTJ.
- 3V C C This pin is connected internally to the collectors of RF device.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- Features
- Applications
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the RFPA5200TR7 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=rfpa5200tr7-qorvo-inc