RD928 overview
RD928 is a component documented by NYLENE. The PDF description identifies it as "Injection Molding." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: NYLENE
- Part number: RD928
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 1/8" bar, 264 psi D648 °F (°C) 130 54 Flammability Flame Resistance uLoa m8" HB (3.0mm) Recommended Processing Considerations: PA6 MoS2 Lubricated/Target Amine Group Injection Molding Drying Temperature 180°F (82°C) Drying Time 2-4 hrs.
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the RD928 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=rd928-nylene