Q6010NH5 overview
Q6010NH5 is a component documented by List of Unclassifed Man. The PDF description identifies it as "Alternistor Triacs." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: List of Unclassifed Man...
- Part number: Q6010NH5
- Category: IC
- Datasheet length: 10 Pages
Key features noted in the PDF
- R o H S C o m p l i a n t
- High surge current capability
- Glass-passivated junctions
- 2500 V ac isolation for L, J, and K Packages
- High commutating dv/dt
- High static dv/dt *TO-220 *TO-218 *TO-218X MT2 MT1 G TO-263 D2Pak TO-252 D-Pak TO-251 V-Pak
- All measurements are made at 60 Hz with a resistive load at an ambient temperature of +25 °C unless specified otherwise.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- E4 - 5 Thyristor Product Catalog +1 972-580-7777 General Notes All measurements are made at 60 Hz with a resistive load at an ambient temperature of +25 °C unless specified otherwise.
- Operating temperature range (T J) is -40 °C to +125 °C.
- Storage temperature range (T S) is -40 °C to +125 °C.
- Lead solder temperature is a maximum of 230 °C for 10 seconds maximum ≥1/16" (1.59 mm) from case.
- When ordering special lead forming, add type number as suffix to part number. (12) Initial on-state current = 400 mA dc for 16 A to 40 A devices and 100 mA for 6 A to 12 A devices. (13) See Figure E4.1 through Figure E4.4 for maximum allow.
- Definition of Quadrants Electrical Isolation Teccor’s isolated alternistor packages withstand a minimum high potential test of 2500 V ac rms from leads to mounting tab, over the operating temperature range of the device.
- The following iso- lation table shows standard and optional isolation ratings. * UL Recognized File E71639 ** For 4000 V isolation, use V suffix in part number. * UL Recognized Product per UL File E71639 ** For 4000 V isolation, use V suff.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the Q6010NH5 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=q6010nh5-list-of-unclassifed-man