Q6010N4 overview
Q6010N4 is a component documented by Littelfuse. The PDF description identifies it as "Triacs (0.8 A to 35 A)." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Littelfuse
- Part number: Q6010N4
- Category: IC
- Datasheet length: 10 Pages
Key features noted in the PDF
- R o H S C o m p l i a n t
- Electrically-isolated packages
- Glass-passivated junctions
- Voltage capability — up to 1000 V
- Surge capability — up to 200 A Compak Package
- Surface mount package — 0.8 A and 1 A series
- New small profile three-leaded Compak package
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- IT(RMS) Part Number VDRM IGTIsolated Non-isolated (4) TO-92 TO-220 Compak TO-202 TO-220 TO-252 D-Pak TO-251 V-Pak TO-263 D2Pak (1) Volts (3) (7) (15) mAmps QI QII QIII QIV QIV MAX See “Package Dimensions” section for variations. (11) MIN M.
- Operating temperature range (T J) is -65 °C to +125 °C for TO-92, -25 °C to +125 °C for Fastpak, and -40 °C to +125 °C for all other devices.
- Storage temperature range (T S) is -65 °C to +150 °C for TO-92, -40 °C to +150 °C for TO-202, and -40 °C to +125 °C for all other devices.
- Lead solder temperature is a maximum of 230 °C for 10 seconds, maximum; ≥1/16" (1.59 mm) from case.
- When ordering special lead forming, add type number as suffix to part number. (12) Initial on-state current = 200 mA dc for 0.8 A to10 A devices, 400 mA dc for 15 A to 35 A devices (13) See Figure E2.1 through Figure E2.6 for maximum allow.
- Definition of Quadrants Electrical Isolation Teccor’s isolated triac packages will withstand a minimum high potential test of 2500 V ac rms from leads to mounting tab or base, over the operating temper ature range of the device.
- The following isolation table shows standard and optional isolation ratings. * UL Recognized File E71639 ** For 4000 V isolation, use V suffix in part number. * Mounted on 1 cm 2 copper foil surface; two-ounce copper foil MT2 POSITIVE (Pos.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- Features
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the Q6010N4 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=q6010n4-littelfuse