Q201E4 overview
Q201E4 is a component documented by New Jersey Semi-Conduct. The PDF description identifies it as "RoHS Compliant." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: New Jersey Semi-Conduct...
- Part number: Q201E4
- Category: IC
- Datasheet length: 5 Pages
Key features noted in the PDF
- RoHS Compliant * Electrically-isolated packages * Glass-passivated junctions * Voltage capability — up to 1000 V * Surge capability — up to 200 A Compak Package * Surface mount pa.
- GTM (14) Amps 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.8 1.8 1.8 1.8 1.8 PGM (14) Watts PG(AV) Watts 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.
- 100/83 dv/dt(c) (1}(4)(1.3; VoltS'(JSec TYP dv/dt (1) Volts/asec T-- 100'-C Tr = 125 °C MIN 100 100 200
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Ill only 09) Minimum non-trigger V^ at 125 :C is 0 2 Vfor all except 50 mA MAX QIV devices which are 02 V at 110 "C Gate Characteristics Teccor tnacs may be turned on between gate and MT1 terminals in the following ways: In-phase signals (.
- In all cases, if maximum surge capability is required pulses should be a minimum of one magnitude above IGT rating with a steep rising waveform (<1 us nse time) ALL POLARITIES ARE REFERENCED TO MT1 MT2 POSITIVE MT-, (Positive Half Cyc e) m.
- maximum, sl;16" (1 59 mm) from case The case temperature OYi >s measured as shown on the dimen- sional outline drawings See "Package Dmensions' section of this catalog
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the Q201E4 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=q201e4-new-jersey-semi-conduct