PX0705/28 overview
PX0705/28 is a component documented by Bulgin Limited. All rig. The PDF description identifies it as "IEC Connectors." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Bulgin Limited. All rig...
- Part number: PX0705/28
- Category: IC
- Datasheet length: 26 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- With electrical ratings up to 20A, 250V (UL) these connector ranges offer solutions to most mains powered equipment and cable applications.
- IEC60 320-2-2 Sheet No: E No Pins Rewirable PX0686 Side Entry Rewirable PX0685 PX0686/SE Current Rating 10A, 250V a.c.
- EN60 320-1 Standard Sheet C13 Class I Straight Female Connector Side Entry Female Connector Angled Female Connector PX0587 PX0587/SE PX0588 Cable Mounting Rewirable Screw Terminals 10A, 250V a.c.
- Cable Mounting Rewirable Screw Terminals 10A, 250V a.c.
- Withdrawal Force: Mouldings: Contacts Approvals: Accessories / Notes: Mating Inlets: RoHS Screw Terminals No suffix (Black), /WH (White), /GY (Grey 10A, 250V a.c. <10mΩ >10³ MΩ Pole-Pole 4.5kV. (Poles-Accessible) Parts 4kV –40°C to +70°C 1.
- UL & CSA) Fits Panel Sizes 1, 1.5, 2.0 or 3.0mm PC Spills 10A, 250V a.c. (15A, 250V a.c.
- Pin Temp.: Mouldings: Contacts: Approvals: Accessories / Notes: Mating Connectors: RoHS Snap fit, /10 (1mm), /15 (1.5mm), /28 (2.8mm solder), /48 (4.8mm tab) No suffix (Black), /WH (White), /GY (Grey) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.
Topics covered by the datasheet
The document includes sections related to:
- IEC_V01 BULGINLIMITED
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the PX0705/28 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=px0705-28-bulgin-limited-all-rig