PTCP-24-33 overview
PTCP-24-33 is a component documented by TECHNOLOGY ASSISTANCE B. The PDF description identifies it as "SWITCHING POWER SUPPLIES." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: TECHNOLOGY ASSISTANCE B...
- Part number: PTCP-24-33
- Category: IC
- Datasheet length: 2 Pages
Applications listed in the PDF
- Full Range
- Low Noise and Ripple
- Built In DC Fan For Cooling
- Current Share Function
- DC Good Signal
- Remote On/Off & Remote Sense Functions
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- SPECIFICATIONS PTCP SERIES 400-1000 WATT SINGLE OUTPUT SWITCHING POWER SUPPLIES INPUT SPECIFICATIONS: ENVIRONMENTAL SPECIFICATIONS Input: 100-264 VAC Single Phase Input Frequency: 47-63Hz (400 Hz Optional) Inrush Current: 60A max at 230VAC.
- Derate to 50% at +70°C Storage Temperature: -40°C to +85°C max 95% Relative Humidity Cooling: Internal ball bearing DC fan Humidity: 20-90% RH non condensing Vibration: 10-500Hz, 2G 10min/1cycle for 60 min (3 axes )(Standard Unit) Shock: 2.
- OUTPUT SPECIFICATIONS Adjustment Range: ±10% (minimum) Minimum Load: none Regulation: Line ±0.5% Load ±0.5% Typical Ripple/Noise: 150mV peak to peak maximum (20 MHz) Set Point Accuracy: ±1%(except 5V=±2%) (maximum) Output voltage adj: ±10%.
- 90 °C ± 5°C Auto Recovery STANDARD FEATURES Full Range Low Noise and Ripple Built In DC Fan For Cooling Current Share Function DC Good Signal Remote On/Off & Remote Sense Functions Rugged Construction Hot Swap Parallel Operation ORing Diod.
- Phone: (201) 385-0500, Fax: (201) 385-0702 W ebsite: www .theallpower .com SPECIFICA TIONS ARE SUBJECT T O CHANGE WITHOUT NOTICE OPTION DESIGNATIONS WIDE TEMPERATURE OPERATION HOT SWAP REDUNDANT OPERATION (ORING DIODE) BATTERY BACK-UP RUGG.
Topics covered by the datasheet
The document includes sections related to:
- APPLICATIONS
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the PTCP-24-33 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ptcp-24-33-technology-assistance-b