PT200-T overview
PT200-T is a component documented by Alfatronix Ltd. The PDF description identifies it as "Solid State Battery GuardS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Alfatronix Ltd
- Part number: PT200-T
- Category: IC
- Datasheet length: 2 Pages
Key features noted in the PDF
- All PowerTectors from 40A upwards are mounted in a rugged die cast aluminium casing with glass filled polycarbonate cover providing terminal protection and insulation.
- Smaller units; 10A and 20A, are available in a lightweight, polycarbonate casing that can be simply fitted in the wiring, like an inline fuse without the need to drill the vehicle.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The PowerTector battery guards offer excellent protection for communication and other mission critical applications a wide ranGe of There are six units in the range from 10A to 200A.
- The 10A and 20A unit offer a simple inline system, usually wired to a specific piece of equipment.
- The 40A and 60A units are connected by M6 brass bolts, the 100A and 200A by M10 brass bolts and use a three point mounting system to avoid rocking or stress to the electronics when mounted on uneven surfaces.
- Manual ShuTdown faciliTy From 40A upwards, the units have the facility to be manually shutdown either through the ignition or a dedicated switch.
- In addition, from 100A upwards the units can have an override switch fittted.
- All PowerTectors from 40A upwards are mounted in a rugged die cast aluminium casing with glass filled polycarbonate cover providing terminal protection and insulation.
- Smaller units; 10A and 20A, are available in a lightweight, polycarbonate casing that can be simply fitted in the wiring, like an inline fuse without the need to drill the vehicle chassis.
Topics covered by the datasheet
The document includes sections related to:
- PT10_V01 ALFATRONIX
- feaTureS
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the PT200-T datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=pt200-t-alfatronix-ltd