PLG01 overview
PLG01 is a component documented by SJM Prewell. All Rights. The PDF description identifies it as "Low Noise Amplifier for GPS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: SJM Prewell. All Rights...
- Part number: PLG01
- Category: Amplifier
- Datasheet length: 8 Pages
Key features noted in the PDF
- 1000 –2500 MHz
- Gain 28.9 dB @ 1575MHz
- NF 0.92 dB @ 1575MHz
- P1dB 14.5 dBm@ 1575MHz
- OIP3 13.6 dBm@ 1575MHz
- Lead-free / Green / compliant SOT-363 Package
Applications listed in the PDF
- High Gain GPS (BEIDOU, GLONASS, GALILEO) Receivers
- ISM and WiMAX LNAs
- WLAN 1) Operation of this device above any of these parameters may cause permanent damage. 2) MTTF is more than 100 years. Functional Diagram RF IN 3 RF OUT 6 Bias GND4 1,2,5 ESD/.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Frequency 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 25℃ -40℃ 85℃ S21 (dB) Frequency (MHz) Gain Vs.
- Frequency Input Return Loss 3 Low Noise Amplifier for GPS SJM PREWELL PLG01 Productsand product information are subject to change without notice.Version 0.3 1100 1150 1200 1250 1300 1350 25º C -40º C 85º C OIP3 (dBm) Frequency (MHz) OIP3 V.
- Frequency -10 Gain Output Power Output power(dBm) / Gain (dB) Input Power (dBm) Output Power / Gain vs Input Power @ 1250MHz Output Power / Gain vs.
- Input Power @ 1250MHz 0 1 2 3 4 5 6 25℃ Id (mA) Vd (V) Id vs.
- Vd 4 Low Noise Amplifier for GPS SJM PREWELL PLG01 Productsand product information are subject to change without notice.Version 0.3 RF IN RF OUT 33 pF 33 pF 33 nH Vdd 6.
- Frequency 1300 1400 1500 1600 1700 1800 1900 25º C -40º C 85º C S21 (dB) Frequency (MHz) Gain Vs.
- Frequency Parameters Units Frequency (MHz) 1400 1575 1600 1700 1800 Typical RF Performance for 1575MHz Tuned Application Circuit (Vdd=3V) Output Return Loss Gain vs.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Applications
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the PLG01 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=plg01-sjm-prewell-all-rights