PG1A-1LFE overview
PG1A-1LFE is a component documented by Elite Enterprises (H.K. The PDF description identifies it as "1W RGB Power LED." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Elite Enterprises (H.K....
- Part number: PG1A-1LFE
- Category: IC
- Datasheet length: 14 Pages
Key features noted in the PDF
- R, G, B three color in one Package
- High flux per LED
- Very long operating life(up to 100k hours)
- Good color uniformity
- Industry best moisture senstivity level - JEDEC 2a 4 week floor life without reconditioning
- Low-temp. & lead free reflow soldering
- RoHS compliant
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- All dimendions without tolerances are for reference only.
- Lambertian - Standard Emitter Lambertian - Low Profile Emitter TOP VIEW BOTTOM VIEW TOP VIEW BOTTOM VIEW Flux Characteristics at 150mA, TJ = 25°C Radiation Pattern Standard Emitter Low Profile Emitter Minimum Typical Green 10.7 17 Blue 2.9.
- Electrical Characteristics at 150mA, TJ = 25°C Temperature Thermal Coefficient of Resistance Dynamic VF (mV/ °C) Junction to Color Resistance ( Ω) ΔVF/ ΔTJ Slug (°C/ W) Green 1.0 -2.0 10 Blue 1.0 -2.0 10 Red 2.4 -2.0 10 Optical Characteris.
- Lumious Flux ΦV (lm) 1.9 2.2 3.1 Forward Voltage VF (V) Color Part Number PG1N-1LFE Min.
- I F = max DC - VR = 5V - * The test is performed after the LED is cooled down to the room temperature.
- IF = max DC Criteria for Judgement Forward Voltage (VF) Luminous Flux or Radiometric Power (ΦV) Test Condition Solderability 50 μA -Initial Level x 0.7 Item Reverse Current (IR) Max.
- Initial Level x 1.1 10-2000-10 Hz, log or linear sweep rate, 20 G about 1 min., 1.5 mm, 3X/axis 260°C ± 5°C, 10 sec.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the PG1A-1LFE datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=pg1a-1lfe-elite-enterprises-h-k