PDHM-20-400 overview
PDHM-20-400 is a component documented by Merrimac Industries, In. The PDF description identifies it as "0 POWER DIVIDER / COMBINER." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Merrimac Industries, In...
- Part number: PDHM-20-400
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Frequency Isolation, Insertion Phase Amplitude VSWR Input Model Range, Performance, dB, Loss, dB, Balance, Balance, dB, (In/Output) Power† † CW input power when used as divider with 1.2:1 VSWR out .
- Internal Load Dissipation: 10 W max.
- Operating Temperature: -- 55° to +85°C NOTES: 1.
- Tolerance on 3 place decimals ±.020(.51) except as noted.
- The PDHM-20-400 2-way Medium Power In-Phase Power Divider covers 10 to 800 MHz with high isolation over the 30 to 600 MHz frequency band.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the PDHM-20-400 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=pdhm-20-400-merrimac-industries-in