PCM250 overview
PCM250 is a component documented by Electrolube. The PDF description identifies it as "Peelable Coating Mask Oct 2016." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Electrolube
- Part number: PCM250
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 2 0 S o l i d s C o n t e n t : 7 0 - 7 4 % Viscosity Brookfield LVT (mPa s): 30,000 to 60,000 A m m o n i a C o n t e n t : 0 .
- PCM should be applied to the area being masked to a thickness of at least 1mm to enable easy peeling af ter coating.
- This can be accelerated by heating to 60°C for 30 minutes but some discolouration of copper may occur.
Topics covered by the datasheet
The document includes sections related to:
- PCM ELECTROLUBE
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the PCM250 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=pcm250-electrolube