PC28F128J3F75A overview
PC28F128J3F75A is a component documented by Micron Technology. The PDF description identifies it as "Numonyx짰 Embedded Flash Memory (J3 65nm) Single Bit per Cell (SBC)." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Micron Technology
- Part number: PC28F128J3F75A
- Category: Memory
- Datasheet length: 66 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Jan 2011 03 Correct the typo of comment for offset 24h at CFI from 2048µs to 1024µs.
- Offered in 128-Mbit, 64-Mbit, and 32-Mbit densities, the J3 65 nm SBC device brings reliable, low-voltage capability (3 V read, program, and erase) with high speed, low-power operation.
- Note that each power supply must reach its minimum voltage range before applying/removing the next supply voltage.
- During infrequent non-periodic transitions, the voltage potential between VSS and input/ output pins may undershoot to –2.0 V for periods < 20 ns or overshoot to VCCQ (max) + 2.0 V for periods < 20 ns.
- During infrequent non-periodic transitions, the voltage potential between V CC and the supplies may undershoot to –2.0 V for periods < 20 ns or VSUPPLY (max) + 2.0 V for periods < 20 ns.
- Device inputs must not be driven until all supply voltages reach their minimum range.
- To minimize the effect of these transient signals, a 0.1 µF ceramic capacitor is required across each VCC/VSS and VCCQ signal.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
- Revision History
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the PC28F128J3F75A datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=pc28f128j3f75a-micron-technology