P6SMBJ9.0 overview
P6SMBJ9.0 is a component documented by Pan Jit International I. The PDF description identifies it as "SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse)." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Pan Jit International I...
- Part number: P6SMBJ9.0
- Category: IC
- Datasheet length: 4 Pages
Key features noted in the PDF
- For surface mounted applications in order to optimize board space.
- Low profile package
- Built-in strain relief
- Glass passivated junction
- Excellent clamping capability
- Low inductance
- Fast response time: typically less than 1.0 ps from 0 volts to BV min
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 2.Mounted on 5.0mm 2 ( .013mm thick) land areas.
- 3.Measured on 8.3ms , single half sine-wave or equivalent square wave , duty cycle= 4 pulses per minutes maximum.
- Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Low inductance Fast response time: typically less than 1.0 ps from 0 volts to BV min Typical IR less than 1µA above 10V High temperature sol.
- Plastic package has Underwriters Laboratory Flammability Classification 94V-O MECHANICAL DATA Case: JEDEC DO-214AA, Molded plastic over passivated junction Terminals: Solder plated , solderable per MIL-STD-750, Method 2026 Polarity: Color.
- Standard Packageing: 12mm tape per (EIA-481) Weight: 0.003 ounces, 0.093 gram MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified.
- Resistive or inductive load, 60Hz.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the P6SMBJ9.0 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=p6smbj9-0-pan-jit-international-i