P6SMBF82A overview
P6SMBF82A is a component documented by DONGGUAN YOU FENG WEI E. The PDF description identifies it as "Surface mounttransient voltage suppressor power 600watts." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: DONGGUAN YOU FENG WEI E...
- Part number: P6SMBF82A
- Category: IC
- Datasheet length: 4 Pages
Key features noted in the PDF
- For surface mounted applications in order to optimize board space.
- Low profile package
- Glass passivated junction
- Low inductance
- Plastic package has Underwriters Laboratory Flamm ability Maximum Ratings and
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Peak Forward Surge Current : 8.3ms single half sine-wave Superimposed on rated load (JEDEC m ethod).
- Peak pulse power waveform is 10/1000 μS. °C/W A kV pF Peak Pulse Power Dissipation on 10/1000 s waveform (Note1,Note2, Fig.1).
- Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load, (JEDEC Method) (Note 3,Fig4).
- Weight: 57m g / 0.002oz Case: SMBF A P6SMBF6.8A THRU P6SMBF550A Characteristics at Ta = 25°C Type Marking Reverse Stand-off Voltage Breakdown Voltage VRMW VBR @ IT Min Max V V V Test Current Reverse Leakage Max.
- Curren t Decayst to 50% of Ipp TA=25 I ,PEAK FORWARD SURGE CURRENT,FSM AMPERES Number of Cycles at 60Hz T= T max JJ 8.3ms Single Half Sinepwave JEDEC Method PEAK PULSE POWER(PPP)OR CURRENT(Ipp) DERATINGIN PERCENTAGE% T ,AMBIENT TEMPERATURE.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- DESCRIPTION
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the P6SMBF82A datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=p6smbf82a-dongguan-you-feng-wei-e