P6SMB82 overview
P6SMB82 is a component documented by Taiwan Semiconductor Co. The PDF description identifies it as "Surface Mount Transient Voltage Suppressor." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Taiwan Semiconductor Co...
- Part number: P6SMB82
- Category: IC
- Datasheet length: 4 Pages
Key features noted in the PDF
- 621 - RATINGS AND CHARACTERISTIC CURVES (P6SMB SERIES) FIG.5- TYPICAL REVERSE LEAKAGE CHARACTERASTICS I , INSTANTANEOUS REVERSE LEAKAGED CURRENT , MICROAMPERES MEASURED AT DEVICES.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Type Number Symbol Value Units Peak Power Dissipation at TA=25 O Tp=1ms(Note 1) PPK Minimum 600 Watts Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 2, 3) - Unidirectional Only IFSM.
- Mounted on 5.0mm2 (.013 mm Thick) Copper Pads to Each Terminal.
- 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 pulses Per Minute Maximum.
- VOLTS(BR) C ,JUNCTION CAP ACITANCE. (pF) J MEASURED at ZERO BIAS Tj =25 C f = 1.0MHz Vsig = 50 mVp-p O MEASURED at STAND-OFF VOLTAGE, V WM 1 10 100 200 100 1000 6000 FIG.1- PEAK PULSE POWER RATING CURVE P , PEAK PULSE POWER, KW PPM tp, PUL.
- VBR measured after IT applied for 300us, IT=square wave pulse or equivalent.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Check voltage, continuous and pulsed current, safe operating area and junction-temperature limits.
- Evaluate conduction and switching losses using the specified drive conditions rather than headline ratings.
- Confirm pinout, package thermal path, gate or base protection and transient derating in the final circuit.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the P6SMB82 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=p6smb82-taiwan-semiconductor-co