P6SMB350 overview
P6SMB350 is a component documented by Diotec Semiconductor. The PDF description identifies it as "Surface mount unidirectional and bidirectional Transient Voltage Suppressor Diodes." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Diotec Semiconductor
- Part number: P6SMB350
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 0.1 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rollen For bidirectional types, suppressor characteristics apply in both directio.
- 170CA Maximum ratings and Characteristics Grenz- und Kennwerte Peak pulse power dissipation (10/1000 µs waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 µs) TA = 25°C PPPM 600 W 1) Steady state power dissipation Verlustleistung im Da.
- instantaneous forward voltage Augenblickswert der Durchlass-Spannung IF = 25 A VF < 3.0 V 2) Operating junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS -50...+150°C -50...+150°C Thermal resistan.
- P6SMB550CA Maximum ratings Grenzwerte Type Typ Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA Stand-off voltage Sperrspannung Max.
- Umgebungstemp. ) 0.1 PPP 0.1µs t 1µs 10µs 100µs 1ms 10msP [kW] Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh.
- von der Pulsdauer (10/1000-Impuls) 10/1000µs - pulse waveform 10/1000µs - Impulsform IPP PPP 100 0 1 2 3 4[ms] [%] tP I /2PPM P /2PPM t = 10 µsr Typ.
Topics covered by the datasheet
The document includes sections related to:
- P6SMB220_11 DIOTEC
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the P6SMB350 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=p6smb350-diotec-semiconductor