P6N4805S overview
P6N4805S is a component documented by HY-LINE Power Component. The PDF description identifies it as "6 W DC-DC Converter P6N-Series Rev: 20171106 f." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: HY-LINE Power Component...
- Part number: P6N4805S
- Category: IC
- Datasheet length: 5 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 1) Start up time @ Vin nominal & R-load 20 ms Under voltage protection P6N48xxx Start up 8.5 V, typ.
- Output: Voltage tolerance ± 2 %, max.
- Temperature coefficient ± 0.02 % / °C Ripple and noise (at 20 MHz BW) <80 mVp-p, (see fig 2) <100 mVp-p, only P6Nxx24D Over load protection 160 % of specified current Short circuit protection Continuous, automatic restart Transient recover.
- Transient response deviation @ 25 % load steps ± 3 %, ± 5 % only P6Nxx3R3x General: Switching frequency 330 kHz, typ.
- MTBF MIL-HDBK-217 F @ 25 °C >800000 h Environmental: Operating ambient temperature range -40…85 °C, see SOA -40… 60 °C, without derating Storage temperature range -55…125 °C Case temperature max.
- 100 °C Humidity 95 %, max., not condensing Cooling Free air convection Physical : Dimensions 31.75 x 20.32 x 10.16 mm Weight 13 g Case material Black plastic, UL94V-0 rated Potting material Epoxy resin, UL94V-0 rated EMC in accordance with.
- Soldering temperature 260 °C for 10 s distance 1.5 mm from case 47 µF + +Vin Load -Vout -Vin +Vout 12 µH Measure point DC DC ESR <1 Ω @ 100 kHz Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffh.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the P6N4805S datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=p6n4805s-hy-line-power-component