P620-07OC overview
P620-07OC is a component documented by PhaseLink Corporation. The PDF description identifies it as "Low Phase Noise XO with multipliers (for 100-200MHz Fund or 3rdOT Xtal)." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: PhaseLink Corporation
- Part number: P620-07OC
- Category: IC
- Datasheet length: 8 Pages
Key features noted in the PDF
- 100MHz to 200MHz Fundamental or 3 rd Overtone Crystal.
- Output range: 100 – 200MHz (no multiplication), 200 – 400MHz (2x multiplier), 400 – 700MHz (4x multiplier), or 800MHz-1 GHz(PLL620-09 only, 8x multiplier).
- CMOS (Standard drive PLL620-07 or Selectable Drive PLL620-06), PECL (Enable low PLL620-08 or Enable high PLL620-05) or LVDS output (PLL620-09).
- Supports 3.3V-Power Supply.
- Available in 16-Pin (TSSOP or 3x3mm QFN) Note: PLL620-06 only available in 3x3mm. Note: PLL620-07 only available in TSSOP.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Output range: 100 – 200MHz (no multiplication), 200 – 400MHz (2x multiplier), 400 – 700MHz (4x multiplier), or 800MHz-1 GHz(PLL620-09 only, 8x multiplier).
- The PLL620-0x family of XO IC’s is specifically designed to work with high frequency fundamental and third overtone crystals.
- Their low jitter and low phase noise performance make them well suited for high frequency XO requireme nts.
- UNITS Supply Voltage V DD 4.6 V Input Voltage, dc V I -0.5 V DD +0.5 V Output Voltage, dc V O -0.5 V DD +0.5 V Storage Temperature T S -65 150 °C Ambient Operating Temperature* T A -40 85 °C Junction Temperature T J 125 °C Lead Temperature.
- Thes e conditions represent a stress rating on ly, and functional operations of the devic e at these or any other conditions above the operational limits noted in this spec ification is not implied. * Note : Operating Temperature is guaran.
- UNITS Crystal Resonator Frequency F XIN Fundamental or 3 rd overtone* 100 200 MHz Crystal Loading Rating C L (xtal) 5 pF Interelectrode Capacitance C 0 5 pF Recommended ESR R E AT cut 30 Ω * Note : 3 rd overtone crystals require an externa.
- UNITS Supply Current (Loaded Outputs) IDD PECL/LVDS/CMOS 100/80/40 mA Operating Voltage V DD 2.97 3.63 V Output Clock Duty Cycle @ 50% V DD (CMOS) @ 1.25V (LVDS) @ V DD – 1.3V (PECL) Short Circuit Current ±50 mA Low Phase Noise XO with mul.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- DESCRIPTION
- PACKAGE INFORMATION
- ORDERING INFORMATION
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the P620-07OC datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=p620-07oc-phaselink-corporation