P25T22LA-UWH-IW overview
P25T22LA-UWH-IW is a component documented by Puya Semiconductor Co.,. The PDF description identifies it as "Ultra Low Power, 2M/1M-bit Serial Standard and Dual I/O Flash Memory Datasheet." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Puya Semiconductor Co.,...
- Part number: P25T22LA-UWH-IW
- Category: Memory
- Datasheet length: 45 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 31, 2021 Puya Semiconductor (Shanghai) Co., Ltd Performance Highlight ◆ Wide Supply Range from 1.65 to 2.0V for Read, Erase and Program ◆ Ultra Low Power consumption for Read, Erase and Program ◆ X1, X2 Multi I/O Support ◆ High reliability.
- 45mm) - KGD for SiP Puya Semiconductor The P25T22L/12L is a serial interface Flash memory device designed for use in a wide variety of high -volume consumer based applications in which program code is shadowed from Flash memory into embedd.
- Specifically designed for use in many different systems, the device supports read, program, and erase operations with a wide supply voltage range of 1.65V to 2.0V.
- Units Test Condition COUT Output Capacitance 8 pF VOUT=GND CIN Input Capacitance 6 pF VIN=GND Note: 1.
- Test Conditions: TA= 25°C, F = 1MHz, Vcc = 1.8V.
- Figure 5-1Maximum Overshoot Waveform -1.0V 20ns 20ns VCC+1.0V VCC Maximum Negative Overshoot Waveform Maximum Positive Overshoot Waveform Figure 5-2 Input Test Waveforms and Measurement Level 0.8VCC 0.2VCC 0.7VCC 0.3VCC 0.5VCC AC Measureme.
- Puya Semiconductor Table 5-2 DC parameters(Ta=-40°C to +85°C) Sym.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the P25T22LA-UWH-IW datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=p25t22la-uwh-iw-puya-semiconductor-co